Fibocom G510 - Page 31

G5/G6-Family AT Commands User Manual Page
31
of
243
READ BINARY
<P1> Rec. No. (0...255)
<P2> Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record number is given in P1 with
P1='00' denoting the current record.
<P3> Length (0...255)
GET RESPONSE
<P1> "00"
<P2> "00"
<P3> Length (0...255)
UPDATE BINARY
<P1> Offset high (0...255)
<P2> Offset low (0...255)
<P3> Length (0...255)
UPDATE RECORD
<P1> Rec. No. (0...255)
<P2> Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record number is given in P1 with
P1='00' denoting the current record.
<P3> Length (0...255)
STATUS
<P1> "00"
<P2> "00"
<P3> Length (0...255)
<data>
Information which shall be written to the SIM (hexadecimal character
format). Man- datory for UPDATE BINARY and UPDATE RECORD.
<sw1> <sw2>
Integer character format. Information, from the SIM, about the execution of
the actual command. These parameters are delivered to the TE in both