Fibocom G510 - Page 87

G5/G6-Family AT Commands User Manual Page
87
of
243
Numbering-plan-identification (applies for Type-of-number = 000,001,010)
Bits 3 2 1 0
0 0 0 0 Unknown
0 0 0 1 ISDN/telephone numbering plan (E.164/E.163)
0 0 1 1 Data numbering plan (X.121)
0 1 0 0 Telex numbering plan
1 0 0 0 National numbering plan
1 0 0 1 Private numbering plan
1 0 1 0 ERMES numbering plan (ETSI DE/PS 3 01-3)
1 1 1 1 Reserved for extension.
All other values are reserved.
+CSCA <SCA> parameters.
Following table describes +CSCA <SCA> valid parameters including the conversion when using stored
<SCA> in SMS PDU mode (editing SMS via +CMGW or +CMGS without SCA). This is according to
24.008V031000P Table 10.5.118/GSM 24.008V031000P: Called party BCD number:
<SCA> Character in SMS (Text mode)
Mapped character for SMS (PDU mode)
Digits: 0-9
Digits: 0-9
‘+’
0x91
‘*’
‘A’
‘#’
‘B’
‘A’
‘C’
‘B’
‘D’
‘C’
‘E’
Example:
AT+CSCA?
+CSCA: "+97212356",145 // Read SCA address and TOSCA stored in SIM (EF-smsp)
OK
AT+CSCA="97212356"
OK
AT+CSCA?
+CSCA: "97212356",129
OK