FibroLAN Falcon-MX User Manual

Falcon M-Class | User Guide
135
Cmd Lvi
Enable accountimg of all all commands with a privilege level higher than
or equal to this level.
Valid values are in the range 0 to 15.
Leave the field empty to disable command accounting.
Exec
Enable exec (login) accounting.
Buttons
Save : Click to save change
Reset : Click to undo any changes made locally and revert to previously
saved values
4.10.1.4 SSH Configuration
SSH is an acronym for Secure SHell. It is a network protocol that allows data to be exchanged using
a secure channel between two networked devices. The encryption used by SSH provides
confidentiality and integrity of data over an insecure network. The goal of SSH was to replace the
earlier rlogin, TELNET and RSH protocols, which did not provide strong authentication or guarantee
confidentiality
Figure 4-74: SSH Configuration
Table 4-71: Authentication Method Configuration Parameters
Mode
Indicates the SSH mode operation. Possible modes are:
Enabled: Enable SSH mode operation.
Disabled: Disable SSH mode operation.
Buttons
Save : Click to save change
Reset : Click to undo any changes made locally and revert to previously saved
values

FibroLAN Falcon-MX Specifications

General

Brand	FibroLAN
Model	Falcon-MX
Category	Switch
Language	English