Falcon M-Class | User Guide
395
5.5.3 SNMPv3 Community Configuration
Configure SNMPv3 community table. The entry index key is “Community”.
Figure 5-25: SNMPv3 Community Configuration
Table 5-24: SNMPv3 Community Configuration Parameters
Check to delete the entry. It will be deleted during the next save.
Indicates the community access string to permit access to SNMPv3 agent.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
The community string will treat as security name and map a SNMPv1 or
SNMPv2c community string.
Indicates the SNMP access source address.
A particular range of source addresses can be used to restrict source subnet
when combined with source mask.
Indicates the SNMP access source address mask.
Add new Entry:
Click to add a new community entry.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
