Falcon M-Class | User Guide
435
6.5.4 Configuration
The switch stores its configuration in a number of text files in CLI format. The files are either virtual
(RAM-based) or stored in flash on the switch.
The available files are:
Running-config: A virtual file that represents the currently active configuration on the switch. This
file is volatile.
Startup-config: The startup configuration for the switch, read at boot time. If this file doesn't exist
at boot time, the switch will start up in default configuration
Default-config: A read-only file with vendor-specific configuration. This file is read when the system
is restored to default settings
Up to 31 other files, typically used for configuration backups or alternative configurations.
6.5.4.1 Save startup configuration
This copies running-config to startup-config, thereby ensuring that the currently active
configuration will be used at the next reboot.
Figure 6-14: Save Configuration display
To Next Page
Loading...
Need help?
General
