FibroLAN Falcon-MX User Manual

Falcon M-Class | User Guide
400
5.5.7 SNMPv3 Access Configuration
Configure SNMPv3 accesses table. The entry index keys are "Group Name", "Security Model" and
"Security Level".
Figure 5-29: SNMPv3 Access Configuration
Table 5-28: SNMPv3 Access Configuration Parameters
SNMPv3 Access Configuration
Delete
Check to delete the entry. It will be deleted during the next save.
Group Name
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Security Model
Indicates the security model that this entry should belong to. Possible
security models are:
any: Any security model accepted (v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
Security Level
Indicates the security model that this entry should belong to. Possible
security models are:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
Read View
Name
The name of the MIB view, defining the MIB objects for which this
request may request the current values.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Write View
Name
The name of the MIB view, defining the MIB objects for which this
request may potentially SET new values.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Buttons
Add New Entry: Click to add a new access entry.
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.

FibroLAN Falcon-MX Specifications

General

Brand	FibroLAN
Model	Falcon-MX
Category	Switch
Language	English