FibroLAN Falcon-MX User Manual

Falcon M-Class | User Guide
360
Table 4-189: sFlow Configuration displays parameters
4.30.2 sFlow Statistics
This sub-section shows receiver and per-port sFlow statistics
Figure 4-217: sFlow Statistics displays
Counter Poller
Interval
With counter polling enabled, this specifies the interval - in seconds - between
counter poller samples. Valid range is 1 to 3600 seconds.
Buttons
Refresh:
Click to refresh this sub-section. Note that unsaved changes will be lost.
Save: Click to save changes. Note that sFlow configuration is not persisted to
non-volatile memory.
Reset: Click to undo any changes made locally and revert to previously saved
values.

FibroLAN Falcon-MX Specifications

General

Brand	FibroLAN
Model	Falcon-MX
Category	Switch
Language	English