FibroLAN Falcon-MX User Manual

Falcon M-Class | User Guide
361
Table 4-190: sFlow Statistics parameters
Receiver Statistics
Owner.
This field shows the current owner of the sFlow configuration.
It assumes one of three values as follows:
• If sFlow is currently unconfigured /unclaimed, Owner contains <none>.
• If sFlow is currently configured through Web or CLI, Owner contains
<Configured through local management>.
• If sFlow is currently configured through SNMP, Owner contains a string
identifying the sFlow receiver.
IP Address /
Hostname
The IP address or hostname of the sFlow receiver
Timeout
The number of seconds remaining before sampling stops and the current
sFlow owner is released.
Tx Successes
The number of UDP datagrams successfully sent to the sFlow receiver.
Tx Errors
The The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver IP/hostname
configuration.
To diagnose, paste the receiver's IP address/hostname into the Ping Web
page (Diagnostics → Ping/Ping6).
Flow Sample
The The total number of flow samples sent to the sFlow receiver
Counter Samples
The total number of counter samples sent to the sFlow receiver.
Port Statistics
Port
The port number for which the statistics applies
Flow Sample
The number of flow samples sent to the sFlow receiver originating from this
port.
Counter Samples
The total number of counter samples sent to the sFlow receiver originating
from this port
Buttons
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
Refresh: Click to refresh this section.
Clear Receiver: Clears the sFlow receiver counters.
Clear Ports: Clears the per-port counters.

FibroLAN Falcon-MX Specifications

General

Brand	FibroLAN
Model	Falcon-MX
Category	Switch
Language	English