FibroLAN Falcon-MX User Manual

Falcon M-Class | User Guide
369
5.1.4 IP Status
This section displays the status of the IP protocol layer. The status is defined by the IP interfaces,
the IP routes
and the neighbour cache (ARP cache) status.
Figure 5-4: IP Status displays
Table 5-3: IP Status displays Parameters
IP Interfaces
Interface
The name of the interface.
Type
The address type of the entry. This may be LINK or IPv4.
Address
The current address of the interface (of the given type).
Status
The status flags of the interface (and/or address).
IP Routes
Network
The destination IP network or host address of this route.
Gateway
The gateway address of this route.
Status
The status flags of the route.
Neighbour cache
IP Address
The IP address of the entry Link (MAC) address for which a binding to the IP
address given exist
Link Address
Link (MAC) address for which a binding to the IP address given exist.
Buttons
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
Refresh: Click to refresh the page

FibroLAN Falcon-MX Specifications

General

Brand	FibroLAN
Model	Falcon-MX
Category	Switch
Language	English