Falcon M-Class | User Guide
50
Table 4-19: Detailed Port Statistics Parameters
Receive Total and Transmit Total
The number of received and transmitted (good and bad) packets.
The number of received and transmitted (good and bad) bytes.
Includes FCS, but excludes framing bits.
The number of received and transmitted (good and bad) unicast
packets
The number of received and transmitted (good and bad) multicast
packets
The number of received and transmitted (good and bad)
broadcast packets.
A count of the MAC Control frames received or transmitted on this
port that have an opcode indicating a PAUSE operation
Receive and Transmit Size
Counters
The number of received and transmitted (good and bad) packets
split into categories based on their respective frame sizes.
Receive and Transmit Queue
Counters
The number of received and transmitted packets per input and
output queue
Receive and Transmit Size Counters
The number of received and transmitted (good and bad) packets split into categories based on
their respective frame sizes.
Receive and Transmit Queue Counters
The number of received and transmitted packets per input and output queue.
The number of frames dropped due to lack of receives buffers or
egress congestion.
The number of frames received with CRC or alignment errors.
The number of short
1
frame received with valid CRC.
1
Short frames are frames that are smaller than 64 bytes
The number of long
2
frames received with valid CRC.
2
Long frames are frames that are longer than the configured
maximum frame length for this port
The number of short
1
frame received with invalid CRC.
The number of long
2
frames received with invalid CRC.
The number of received frames filtered by the forwarding process.
1
Short frames are frames that are smaller than 64 bytes.
2
Long frames are frames that are longer than the configured maximum frame length for this port.
The number of frames dropped due to output buffer congestion.
To Next Page
