Fluke 54200 - Page 242

54200
Users Manual
6-34
•
Pre-emphasis
Header:
PREEM
PHASIS
Data element:
ON
|
OF
F
Remark: The preemphasis is set according to the current TV-standard.
If SECAM L is on, the command is accepted but the preemphasis is
always off. After changing the standard the preemphasis is set
according to this command.
Example:
PREEMPHASIS OFF
or
PREEM OF
switches the preemphasis off.
•
NICAM RSSF
Header:
RSSF
Data element:
ON
|
OF
F
Remark: You can only change the RSSF with this command or in manual
operation using the keyboard of the generator. There is no automatism .
Example:
RSSF OFF
or
RSSF OF
switches RSSF off.
•
NICAM Amplitude
Header:
NICA
MPLITUDE
Data element:
L
OW
| H
IGH
Example:
NICAMAMPLITUDE LOW
or
NICA L
sets the NICAM amplitude to low.