54200
Users Manual
3-12
•
Connect the
RF OUTPUT
on the front panel of the 54200 to the antenna input of
your TV. Use an appropriate RF connection cable, for example, the attached RF
cable BNC to TV.
•
Check the correct video and sound reproduction on the TV.
In this example, you get the following combined test pattern and a mono sound with
1 kHz modulation.
Figure 3-16. Combined Test Pattern
•
Select different test patterns using the
PATTERN
keypad.
For more details about the operating principle and the applications of the test patterns,
see Chapter 4, How to Use the Instrument.
To Next Page
Loading...