118 Printer Connection and Software Installation
b Enter the WEP key, and then press the button.
c Select the desired transmit key from Auto or WEP Key 1 to WEP Key 4, and then press the button.
The This Setting Becomes Effective after Restart message appears.
Proceed to step 12.
9 Select WEP for the encryption method, and then press the button.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
10 Enter the WEP key, and then press the button.
11 Select the desired transmit key from WEP Key 1 to WEP Key 4, and then press the button.
The This Setting Becomes Effective after Restart message appears.
12 Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
To Next Page
Loading...
