344 Troubleshooting
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 345
• "Toner Smears or Print Comes Off" on page 346
• "Random Spots/Blurred Images" on page 347
• "The Entire Output Is Blank" on page 348
• "Streaks Appear on the Output" on page 349
• "Vertical Blanks" on page 350
• "Mottle" on page 350
• "Ghosting" on page 351
• "Light-Induced Fatigue" on page 351
• "Fog" on page 352
• "Bead-Carry-Out (BCO)" on page 352
• "Jagged Characters" on page 353
• "Banding" on page 353
• "Auger Mark" on page 354
• "Wrinkled/Stained Paper" on page 354
• "Damage on the Leading Edge of Paper" on page 355
• "The Top and Side Margins Are Incorrect" on page 355
• "Protrudent/Bumpy Paper" on page 356
• "Images Are Skewed" on page 356
NOTE:
• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.
See also:
• "Understanding the Printer Menus" on page 252
• "CentreWare Internet Services" on page 69
To Next Page
Loading...
Need help?
General
