Fuji Xerox DocuPrint M355 df - F;W Version; Adjust Papertype; Adjust Transfer Unit

282 Using the Operator Panel Menus and Keypad
Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality adjustment
settings, and configure the security settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• F/W Version
Purpose:
To confirm the current F/W version.
• Adjust PaperType
Purpose:
To specify paper density settings.
Values:
• Adjust Transfer Unit
Purpose:
To specify the transfer unit voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
Plain Lightweight
Heavyweight
*
Plain 0
*
-5 to +10
Plain Thick 0
*
-5 to +10
Lightweight Cardstock 0
*
-5 to +10
Heavyweight Cardstock 0
*
-5 to +10
Envelope 0
*
-5 to +10
Labels 0
*
-5 to +10