Fuji Xerox DocuPrint M355 df - Adjust Altitude; Clear Storage; Staticmemory Ctr

286 Using the Operator Panel Menus and Keypad
• Clear Storage
NOTE:
• Clear Storage feature is available only when the optional 512MB memory is installed.
Purpose:
To clear all files stored as Secure Print and Sample Print in the RAM disk.
Values:
• Non-Genuine
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using a non-Fuji Xerox toner cartridge may severely damage your printer. The warranty does not cover damages caused by
using non-Fuji Xerox toner cartridge.
Values:
• Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE:
• An incorrect altitude adjustment setting leads to problems such as poor printing quality and incorrect indication of remaining
toner.
Values:
• StaticMemory Ctr
Purpose:
To widen the print gap not to leave toner streak on the next page.
NOTE:
• StaticMemory Ctr feature shortens the life of the drum cartridge.
Values:
All Clear Deletes all files stored as Secure Print and Sample Print in the RAM
disk.
Secure Document Deletes all files stored as Secure Print in the RAM disk.
Stored Document Deletes all files stored as Sample Print in the RAM disk.
Toner Off
*
Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.
0m
*
Sets the altitude of the location where the printer is installed.
1000m
2000m
3000m
Off
*
Does not widen the print gap.
On Widens the print gap.