Copying 173
Collated
To sort the copy output: For example, if you make two copies of three page documents, one complete three page
document will be printed followed by the second complete document.
NOTE:
• You can collate more pages when optional 512MB memory is installed.
1 Select Collated, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
When you are using the document glass and it is set to On, the display prompts you for another page.
a If you want to place a new document, press the button to select Yes, and then press the button.
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the button.
b If you finish copying, select No.
Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original.
1 Select Sharpness, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Off Does not copy in collated order.
On Copies in collated order.
Auto* Only the documents loaded from DADF are copied in collated order.
Sharper Makes the copy image sharper than the original.
Normal* The clarity of the image is the same as the original.
Softer Makes the copy image softer than the original.
To Next Page
Loading...
Need help?
General
