228 Faxing
Sending a Fax From Memory
1 Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Loading an Original Document" on page 225
2 Press the (Fax) button.
3 Adjust the document resolution to suit your fax needs.
See also:
• "Adjusting the Document Resolution" on page 227
• "Adjusting the Document Contrast" on page 227
4 To select a fax number, do one of the followings:
• Select Fax to, and then press the button. Select Phone Book, and then press the button.
• Press the One Touch Dial buttons, and go to step 6.
You need to register a speed dial number before you can use the One Touch Dial buttons. (For details, see
"Setting Speed Dial" on page 238.)
• Select Fax to, and then press the (Address Book) button. Select one of the followings:
• Press the (Redial/Pause) button to redial, and go to step 6.
• Press the (Speed Dial) button. (For details, see "Sending a Fax Using Speed Dial" on page 239.)
5 Select the desired recipient, and then press the button to select the recipients. Press the button to
confirm.
6 Press the (Start) button.
When the document is placed on the document glass, the display prompts you for another page. Select Yes to
add more documents or No to begin sending the fax immediately, and then press the button.
The printer starts dialing the number, and then sending the fax when the remote fax machine is ready.
NOTE:
• By pressing the (Stop) button, you can cancel the fax job at any time while sending the fax.
All Entries Displays a list of registered fax numbers.
Group Dial Displays a list of registered group dial numbers.
Search Local Searches for a fax number from the local Phone Book.
Search Server Searches for a fax number on the LDAP server. This item is displayed when Server
Phone Book in the System Settings menu is set to On.
To Next Page
Loading...
