Fuji Xerox DocuPrint M355 df - Defaults Settings; Secure Receive; Login Error; Copy Defaults

Using the Operator Panel Menus and Keypad 291
• Secure Receive
NOTE:
• Secure Receive feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify whether to require a password to receive faxes, and to set or change the password.
Values:
*1
This item is available only when SecureReceiveSet is set to Enable.
• Login Error
NOTE:
• Login Error feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin Menu and
Report / List menu.
Values:
 Defaults Settings
Use Defaults Settings menu to modify the defaults for the Copy, Scan, Fax, or Print from USB menu.
Copy Defaults
Purpose:
To modify the defaults for the Copy menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• ID Card Copy
Purpose:
To specify the ID Card Copy.
Values:
SecureReceiveSet Disable
*
Does not require a password to receive faxes.
Enable Requires a password to receive faxes.
Change Password
*1
0000–9999 Sets or changes the password required to receive faxes.
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5 times
*
Sets the number of error entry attempts allowed when an
administrator logs in.
1-10
Off
*
On