174 Copying
Reduce/Enlarge
To reduce or enlarge the size of a copied image from 25 to 400% when you copy original documents from the
document glass or the DADF.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Select Reduce/Enlarge, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
•mm series
•inch series
NOTE:
• You can also specify the value in increments of 1% from 25 to 400 by pressing the
or button or
entering a value
using the number pad. See the following table for specific zoom ratios.
The methods to load print media vary depending on the size and orientation of the print media. For details, see
"Loading Print Media in the Standard 250 Sheet Tray and the Optional 250 Sheet Feeder" on page 132 or
"Loading Print Media in the Bypass Tray" on page 135.
For print media that can be loaded, see "About Print Media" on page 122.
200%
141% A5 → A4
122% A5 → B5
100%*
81% B5 → A5
70% A4 → A5
50%
200%
154%
129% 8.5 x 11" → 8.5 x 14"
100%*
78% 8.5 x 14" → 8.5 x 11"
64%
50%
Copy
Original
A5 B5 A4
A5 100% 122% 141%
B5 81% 100% 115%
A4 70% 86% 100%
To Next Page
Loading...
Need help?
General
