124 Printing Basics
Duplex Automatic Document Feeder (DADF) Guidelines
The DADF accommodates the following original sizes:
• Width: 139.7
–215.9 mm (5.5–8.5 inches)
• Length: 139.7
–355.6 mm (5.5–14 inches)
The weight range includes:
• Simplex: 50
–125 gsm
• Duplex: 60
–125 gsm
Follow these guidelines when loading original documents into the DADF:
• Load documents face up so that the top of the document enters the printer first.
• Place only loose sheets of paper in the DADF.
• Adjust the document guides so that they fit against the documents.
• Insert paper in the document feeder tray only when the ink on the paper is completely dry.
• Do not load documents above the MAX fill line. You can load up to 50 sheets of 64 gsm documents.
NOTE:
• You cannot load the following documents in the DADF. Be sure to place them on the document glass.
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper
To Next Page
Loading...
