176 Copying
N-Up
To print two original images to fit onto one sheet of paper.
1 Select N-Up, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
When you are using the document glass and it is set to Auto or Manual, the display prompts you for another
page.
a If you want to place a new document, press the button to select Yes, and then press the button.
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the button.
b If you finish copying, select No.
Off* Does not perform N-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
Manual Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Auto:
Automatically
reduces the
pages to fit in
one page.
Manual:
Reduces the pages in
the custom size
depending on the
setting of the
Reduce/Enlarge menu.
To Next Page
Loading...
