254 Using the Operator Panel Menus and Keypad
Meter Readings
Purpose:
To check the total number of printed pages.
Values:
*1
This item always shows 0 on your printer.
Admin Menu
Use the Admin Menu menu to configure a variety of printer features.
Phone Book
Use the Phone Book menu to configure the speed dial and group dial settings.
• Speed Dial
Purpose:
To store up to 200 frequently dialed numbers in speed dial locations.
• Group Dial
Purpose:
To create a group of fax destinations and register it under a two-digit dial code. Up to six group dial codes can be
registered.
PCL Settings
Use the PCL Settings menu to change printer settings that only affect jobs using the PCL emulation printer
language.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Paper Tray
Purpose:
To specify the default paper tray.
Values:
*1
Tray 2 is available only when the optional 250 sheet feeder is installed.
Meter 1
*1
Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3
*1
Displays the total number of large size color prints.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 + Meter 2).
Auto
*
Bypass Tray
Tray 1
Tray 2
*1
To Next Page
Loading...
