Fuji Xerox DocuPrint M355 df - Resetting to Factory Defaults

Using the Operator Panel Menus and Keypad 313
Resetting to Factory Defaults
After executing this function and rebooting the printer, the address book or all the menu parameters, except the
parameters for the network, are reset to their default values.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Initialize NVM, and then press the button.
5 Select the desired setting, and then press the button.
6 Select Start, and then press the button.
The printer restarts automatically to apply the settings.