Using the Operator Panel Menus and Keypad 299
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
• TIFF File Format
Purpose:
To specify the default TIFF file format.
Values:
• Image Compression
Purpose:
To specify the image compression level.
Values:
• Max Email Size
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes. The default
is 2048 K bytes.
Fax Defaults
Purpose:
To modify the defaults for the Fax menu.
NOTE:
• The FAX service cannot be used unless you set up a region code under Region. If Region is not set up, a message Set
the Region Code appears on the display.
• Values marked by an asterisk (*) are the factory default menu settings.
2 mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50 mm/0.0 - 2.0 inch
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50 mm/0.0 - 2.0 inch
TIFF V6
*
Sets the default TIFF file format to TIFF V6.
TTN2 Sets the default Tiff file format to TTN2.
Higher Sets the image compression level to Higher.
Normal
*
Sets the image compression level to Normal.
Lower Sets the image compression level to Lower.