Fuji Xerox DocuPrint M355 df - Adjust Density; Adjust Fusing Unit

Using the Operator Panel Menus and Keypad 283
• Adjust Fusing Unit
Purpose:
To adjust the fusing temperature setting for each paper type.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
• Adjust Density
Purpose:
To adjust density level.
Values:
Plain 0
*
-3 to +3
Plain Thick 0
*
-3 to +3
Lightweight Cardstock 0
*
-3 to +3
Heavyweight Cardstock 0
*
-3 to +3
Envelope 0
*
-3 to +3
Labels 0
*
-3 to +3
Darker3 Adjusts the density level darker than the original. Works well with light
print or faint pencil markings.
Darker2
Darker1
Normal
*
Works well with standard typed or printed documents.
Lighter1 Adjusts the density level lighter than the original. Works well with dark
print.
Lighter2
Lighter3