Fuji Xerox DocuPrint M355 df - Select Tray; Lighten;Darken

Copying 171
 Select Tray
To select a tray.
1 Select Select Tray, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
NOTE:
• Tray 2 is only available when the optional 250 sheet feeder is installed.
 Lighten/Darken
To adjust the contrast to make the copy lighter or darker than the original.
1 Select Lighten/Darken, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Bypass Tray The paper is fed from the bypass tray.
Tray 1* The paper is fed from standard 250 sheet tray.
Tray 2 The paper is fed from optional 250 sheet feeder.
Lighter3 Works well with dark documents.
Lighter2
Lighter1
Normal* Works well with normal typed or printed documents.
Darker1 Works well with light documents or faint pencil markings.
Darker2
Darker3