Fuji Xerox DocuPrint M355 df - Company Name; Your Fax Number; Redial Interval; Junk Fax Filter

270 Using the Operator Panel Menus and Keypad
• Redial Interval
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1 minute.
• Junk Fax Filter
Purpose:
To reject unwanted faxes by accepting faxes only from the fax numbers registered in the Fax Address Book.
Values:
• Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
• Remote Rcv Tone
Purpose:
To specify the tone in two digits to start Remote Receive.
• Send Header
Purpose:
To print the information of the sender on the header of the faxes.
Values:
•Company Name
Purpose:
To set the sender name to be printed on the header on faxes.
• Your Fax Number
Purpose:
To set the fax number of the printer, which will be printed on the header of a fax message.
NOTE:
• Ensure to specify Your Fax Number before using Junk Fax Filter.
Off
*
Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers.
Off
*
Does not receive a fax by pressing a remote receive code on the
external telephone.
On Receives a fax by pressing a remote receive code on the external
telephone.
Off Does not print the sender
's information on the header of faxes.
On
*
Prints the sender's information on the header of faxes.