178 Copying
Changing the Default Settings
The default settings of the Copy menu options including contrast and image quality can be set to the most frequently
used modes. When you copy a document, the specified default settings are used unless they are changed by using
the corresponding buttons on the operator panel.
To create your own default settings:
1 Press the (System) button.
2 Select Defaults Settings, and then press the button.
3 Select Copy Defaults, and then press the button.
4 Select the desired menu item, and then press the button.
5 Select the desired setting or enter the value using the number pad, and then press the button.
6 Repeat steps 4 and 5 as needed.
To return to the previous screen, press the (Back) button.
To Next Page
Loading...
Need help?
General
