290 Using the Operator Panel Menus and Keypad
• Edit E-mail From Fields
Purpose:
To specify whether to enable editing of the transmission source when you use Scan to E-mail.
Values:
• Reconfirm Recipients
NOTE:
• If Reconfirm Recipients menu is set to Reconfirm Recipients, recipients can only be selected from the phone book
or the address book. You cannot directly enter an address or fax number.
Purpose:
To specify whether to confirm the recipient before sending a fax or scan.
Values:
• Domain Filtering
NOTE:
• Set the domains from SMTP Domain Filtering on the CentreWare Internet Services.
Purpose:
To specify whether to only send e-mails to specified domains.
Values:
• Software Download
Purpose:
To enable or disable download of firmware updates.
Values:
Disable Disables editing of the transmission source.
Enable
*
Enables editing of the transmission source.
No Confirmation
*
Does not display a screen to reconfirm the recipient before the job is
actually sent.
Reconfirm Recipient Displays a screen to reconfirm the recipient before the job is actually
sent.
Off
*
Disables Domain Filtering.
Allow Domains Only allows e-mails to be sent to specified domains.
Disable Disables firmware updates.
Enable
*
Enables firmware updates.