Fuji Xerox DocuPrint M355 df User Manual

274 Using the Operator Panel Menus and Keypad
• Fax Transmit
Purpose:
To set whether to print a transmission result after a fax transmission.
Values:
• Fax Broadcast
Purpose:
To set whether to print a broadcast result after a fax broadcast to multiple destinations.
Values:
• Fax Protocol
Purpose:
To set whether to print the protocol monitor report, which helps you identify the cause of a communication problem.
Values:
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Port Status
NOTE:
• Port Status feature is available only for the USB port on the rear of the printer.
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
Print Always Prints a transmission report after every fax transmission.
Print On Error
*
Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Print Always
*
Prints a broadcast report after every fax broadcast.
Print On Error Prints a broadcast report only when an error occurs.
Print Disable Does not print a broadcast report after a fax broadcast to multiple
destinations.
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints a protocol monitor report only when an error occurs.
Print Disable
*
Does not print a protocol monitor report.
Disable Disables the USB port.
Enable
*
Enables the USB port.

Fuji Xerox DocuPrint M355 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M355 df
Category	Printer
Language	English