Fuji Xerox DocuPrint M355 df User Manual

Using the Operator Panel Menus and Keypad 285
• Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory for system parameters, Address Book data for fax, or Address Book data
for scan. After executing this function and rebooting the printer, the menu parameters or data, except the parameters
for the network, are reset to their factory default values.
Values:
See also:
• "Resetting to Factory Defaults" on page 313
• Init Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Values:
• Reset Transfer Unit
Purpose:
To initialize the transfer unit counter.
Values:
• Reset Fusing Unit
Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Values:
• Clear Job History
Purpose:
To clear the job history of all finished jobs.
Values:
User Fax Section Cancel
*
Does not initialize the fax number entries in the Address Book.
Start Initializes the fax number entries in the Address Book.
User Scan
Section
Cancel
*
Does not initialize the e-mail and server address entries in the
Address Book.
Start Initializes the e-mail and server address entries in the Address Book.
System Section Cancel
*
Does not initialize the system parameters.
Start Initializes the system parameters.
Cancel
*
Does not initialize the print meter.
Start Initializes the print meter.
Cancel
*
Does not initialize the transfer unit counter.
Start Initializes the transfer unit counter.
Cancel
*
Does not initialize the fusing unit counter.
Start Initializes the fusing unit counter.
Cancel
*
Does not clear the job history.
Start Clears the job history.

Fuji Xerox DocuPrint M355 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M355 df
Category	Printer
Language	English