280 Using the Operator Panel Menus and Keypad
• RAM Disk
NOTE:
• RAM Disk feature is available only when the optional 512MB memory is installed on the printer.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and Sample Print features. The change
becomes effective after the printer is turned off and then on again.
Values:
NOTE:
• Restart your printer when you change the settings for the RAM Disk menu.
• Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Values:
• Auditron Mode
Purpose:
To specify whether to limit the functions that can be used per user by Auditron authentication.
Values:
• No Account User Print
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
Disable Does not allocate memory to the RAM disk file system. Secure Print
and Sample Print jobs will abort and be recorded to the job log.
Enable
*
200MB
*
Sets the allocation of memory to the RAM disk file system in
increments of 50 MB.
50-350MB
Off
*
No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper
size, the printer substitutes paper of nearest size.
Nearest Size Substitutes paper of nearest size.
Use Bypass Tray Substitutes paper from the bypass tray.
Off* Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off* Does not permit non-account user to print the data.
On Permits non-account user to print the data.
To Next Page
Loading...
