EasyManua.ls Logo

Fuji Xerox DocuPrint M355 df - Copy Function

Fuji Xerox DocuPrint M355 df
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32 Specifications
Copy Function
Type Desktop
Memory Standard: 256 MB
Optional: 512 MB
Maximum memory capacity: 768 MB (Standard + optional 512MB memory)
IMPORTANT:
Depending on the function, the optional 512MB memory is required.
The above memory capacity does not guarantee print quality depending on the
type and content of print data.
HDD
Color Capability Black and White
Printing Resolution 600 × 600 dpi
Tone 256 gray level
Warm-up Time 20 seconds or less*
(16 seconds* for waking up from the Sleep mode)
*: The values are based on a room temperature of 20 °C and on the factory default setting.
IMPORTANT:
It may take longer due to the image quality adjustment.
Original Paper Size Books: Maximum 215.9 × 297 mm
Sheets: Maximum 215.9 × 355.6 mm (Legal, when the duplex automatic document
feeder (DADF) is used)
Output Paper Size Maximum: Legal (8.5 × 14"), 215.9 × 355.6 mm
Minimum: 3 × 5", 76.2 × 127 mm
Output Paper Weight 60 – 216 gsm
IMPORTANT:
Use paper recommended by Fuji Xerox. Copying may not be performed correctly
depending on the conditions.
First Copy Output Time Document glass:
9 seconds or less (for A4 / standard mode)
DADF:
11 seconds or less (for A4 1 sided/ standard mode)
Reduction/Enlargement Size-for-Size: 1:1 ± 1.3%
Preset %: 1:0.50, 1:0.70, 1:0.81, 1:1.00, 1:1.22, 1:1.41, 1:2.00
Variable %: 1:0.25 - 1:4.00 (1% increments)
Continuous Copy Speed
*1
1 Sided
*2
: 35 sheets/minute; 2 Sided
*3
: 21 pages/minute
IMPORTANT:
*1 Print speed may decrease due to factors such as paper type, paper size, and printing
conditions. Print speed may also decrease for image quality adjustment.
*2 When continuously printing a single document of A4 plain paper.
*3 A4 continuous printing
Paper Tray Capacity Standard:
250 sheets (Standard 250 sheet tray) + 50 sheets (Bypass tray)
Optional:
250 sheets (Optional 250 sheet feeder)
Maximum paper capacity:
550 sheets (Standard + Optional 250 sheet feeder)
IMPORTANT:
For special paper, there is a limitation of the following.
From the bottom of the tray, up to 10 mm height (Standard 250 sheet tray)
From the bottom of the tray, up to 5.5 mm height (Bypass tray)
When using Fuji Xerox P paper (64 gsm)

Table of Contents

Related product manuals