Using the Operator Panel Menus and Keypad 281
• Letterhead 2-Sided Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
• Report 2-Sided Mode
Purpose:
To specify to print reports on both sides a sheet of paper.
Values:
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
• Server Address Book
Purpose:
To specify whether to search the e-mail addresses from the Address Book for the LDAP server.
Values:
NOTE:
• You can search the e-mail addresses only from the Address Book that is local when Server Address Book is set to Off.
• Server Phone Book
Purpose:
To specify whether to search the phone numbers from the Phone Book for the LDAP server.
Values:
NOTE:
• You can search the phone numbers only from the local Phone Book when Server Phone Book is set to Off.
Disable
*
Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
1-Sided
*
Prints reports on one side of a sheet of paper.
2-Sided Prints reports on both sides of a sheet of paper.
Off Does not show the alert message when the toner is low.
On
*
Shows the alert message when the toner is low.
Off
*
Does not search the e-mail addresses from the Address Book for the
LDAP server.
On Searches the e-mail addresses from the Address Book for the LDAP
server.
Off
*
Does not search the phone numbers from the Phone Book for the
LDAP server.
On Searches the phone numbers from the Phone Book for the LDAP
server.