Basic Operation 45
Operator Panel
The operator panel has a 160 × 64 dots liquid crystal display (LCD), light-emitting diodes (LED), control buttons, one
touch dial buttons and number pad, which allow you to control the printer.
1 One Touch Dial buttons
• Calls up the stored Fax number registered in the Phone Book. The first eight fax numbers in the Phone Book
are assigned to the buttons in row order, starting from the left top corner.
2 LCD Panel
• Displays various settings, instructions, and error messages.
3 buttons
• Moves a cursor or highlight up or down.
4 (Job Status) button
• Moves to the top level of the Job Status menu.
5 buttons
• Moves a cursor or highlight left or right.
6 (System) button
• Moves to the top level of the System menu.
7 Number Pad
• Enters characters and numbers.
8 CA (Clear All) button
• Resets the current setting, and returns to the top level of each menu.
9 (Energy Saver) button
• Lights up in the Power Saver mode. Press this button to enter or exit the Power Saver mode.
10 (Stop) button
• Cancels the current processing or pending job.
11 (Start) button
• Starts a job.
12 (Error) LED
• Lights up when the printer has an error.
123456789
1011121314151617181920212223
To Next Page
Loading...
