Fuji Xerox DocuPrint M355 df - Margin Top;Bottom; Margin Left;Right; Margin Middle

Copying 177
 Margin Top/Bottom
To specify the top and bottom margins of the copy.
1 Select Margin Top/Bottom, and then press the button.
2 Press the or button or use the number pad to set the desired value, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
 Margin Left/Right
To specify the left and right margins of the copy.
1 Select Margin Left/Right, and then press the button.
2 Press the or button or use the number pad to set the desired value, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
 Margin Middle
To specify the middle margin of the copy.
1 Select Margin Middle, and then press the button.
2 Press the or button or use the number pad to set the desired value, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch