Fuji Xerox DocuPrint M355 df - Sent Fax Fwd; Fwd. Settings Num; Prefix Dial Num; Discard Size

272 Using the Operator Panel Menus and Keypad
• Sent Fax Fwd
Purpose:
To set whether to forward incoming faxes to a specified destination.
Values:
• Fwd. Settings Num
Purpose:
To enter the fax number of the destination to which incoming faxes will be forwarded.
• Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
• Prefix Dial Num
Purpose:
To set a prefix dial number of up to five digits. This number dials before any auto dial number is started. It is useful
for accessing the Private Automatic Branch Exchange (PABX).
• Discard Size
Purpose:
To set the printer to discard images or any text at the bottom of a fax page when the entire page does not fit the
output paper.
Values:
•ECM
Purpose:
To set whether to enable or disable the Error Correction Mode (ECM). To use the ECM, the remote machines must
also support the ECM.
Values:
Off
*
Does not forward incoming faxes.
Forward Forwards incoming faxes to a specified destination. Prints incoming
faxes if an error occurs during the transfer.
Print & Forward Prints incoming faxes and also forwards them to a specified
destination.
Off
*
Does not set a prefix dial number.
On Sets a prefix dial number.
Off
*
Prints excess images or text at the bottom of a fax page without
discarding it.
On Discards any excess images or text.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate paper
size.
Off Disables the ECM.
On
*
Enables the ECM.