Fuji Xerox DocuPrint M355 df - Scan Defaults; File Format

296 Using the Operator Panel Menus and Keypad
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
Scan Defaults
To modify the defaults for the Scan menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
• Color
Purpose:
To specify whether to scan in color, black and white, or gray scale.
Values:
• Resolution
Purpose:
To specify the default scan resolution.
Values:
*1
For color scan, 400 × 400 dpi and 600 × 600 dpi are available only when the optional 512MB memory is installed on the printer.
0 mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0 - 50 mm/0.0 - 2.0 inch
PDF*
MultiPageTIFF
TIFF
JPEG
XDW
Black & White Scans in black and white.
Grayscale Scans in grayscale.
Color
*
Scans in color.
200
× 200 dpi*
300
× 300 dpi
400
× 400 dpi
*1
600 × 600 dpi
*1