238 Faxing
Automatic Dialing
This section includes:
• "Speed Dialing" on page 238
• "Setting Speed Dial" on page 238
• "Sending a Fax Using Speed Dial" on page 239
• "Group Dialing" on page 240
• "Setting Group Dial" on page 240
• "Editing Group Dial" on page 240
• "Sending a Fax Using Group Dialing (Multi-address Transmission)" on page 241
• "Printing a Fax Address Book List" on page 241
Speed Dialing
You can store up to 200 frequently dialed numbers in speed dial locations (001–200).
When the speed dial job specified in the delayed fax or redial exists, you cannot change the speed dial number from
the operator panel or CentreWare Internet Services.
Setting Speed Dial
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Phone Book, and then press the button.
4 Select Speed Dial, and then press the button.
5 Select the desired speed dial number between 001 and 200, and then press the button.
6 Select Name, and then press the button.
7 Enter the name, and then press the button.
8 Select Fax Number, and then press the button.
9 Enter the number you want to store using the number pad, and then press the button.
To insert a pause between numbers, press the (Redial/Pause) button. "-" appears on the LCD panel.
10 Select Apply Settings, and then press the button.
11 Select Start, and then press the button.
To store more fax numbers, repeat steps 5 to 11.
To return to the top level of the System menu, press the CA (Clear All) button.
To Next Page
Loading...
