172 Copying
2-Sided
To make duplex copies with the specified binding position.
1 Select 2-Sided, and then press the button.
2 Select the desired setting, and then press the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
When you are using the document glass and it is set to 1->2-Sided or 2->2-Sided, the display prompts you
for another page after pressing the (Start) button.
a If you want to place a new document, press the button to select Yes, and then press the button.
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the button.
b If you finish copying, select No.
NOTE:
• When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set Document
Size to the same size as the document.
Auto Exposure
To suppress the background of the original to enhance text on the copy.
1 Select Auto Exposure, and then press the button.
2 Select On, and then press the button.
1->1-Sided* Select 1-sided or 2-sided and specify binding position for the 2 sided copy.
1->2-Sided
2->1-Sided
2->2-Sided
1->2 Short Edge
2->1 Short Edge
2->2 Short Edge
To Next Page
Loading...
