Basic Operation 47
Installing Optional Accessories
You can make the printer more functional by installing the optional accessories such as the 512MB Memory, the 250
Sheet Feeder(MFP), and the Wireless Network Kit b/g/n. This section describes how to install these printer's
options.
This section includes:
• "Installing the Optional 512MB Memory" on page 47
• "Installing the Optional 250 Sheet Feeder" on page 52
• "Installing the Optional Wireless Printer Adapter" on page 58
Installing the Optional 512MB Memory
NOTE:
• Your printer supports additional 512 MB memory module.
1 Turn off the printer.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
2 Turn the screw on the control board cover counterclockwise.
NOTE:
• Loosen the screw. You do not need to remove the screw.
To Next Page
Loading...
Need help?
General
