To Next Page

To Previous Page

48 Basic Operation

3 Slide the control board cover towards the rear of the printer and remove the cover.

4 Hold the edge of the memory module with the labeled side down and the connector toward the control board,

and then insert it into the slot.

5 Push the memory module firmly into the slot.

NOTE:

• Ensure that the memory module is firmly fixed in the slot and does not move easily.

6 Align the guide on the control board cover with the slot around the control board, and slide it towards the front

of the printer.

Fuji Xerox DocuPrint M355 df User Manual

Questions and Answers: