Using the Operator Panel Menus and Keypad 311
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer switches to the Power Saver mode after the specified
time.
To set the power saver timer:
NOTE:
• If the Panel Lock Set is set to Enable, you need to enter the four digit password to enter the Admin Menu.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select System Settings, and then press the button.
4 Select Power Saver Timer, and then press the button.
5 Select Low Power Timer or Sleep Timer, and then press the button.
6 Press the or button or enter the desired value using the number pad, and then press the button.
You can select from 1–60 minutes for Low Power Timer or 1–60 minutes for Sleep Timer.
7 To return to the previous screen, press the (Back) button.
To Next Page
Loading...
Need help?
General
