Using the Operator Panel Menus and Keypad 301
Print from USB Defaults
To modify the defaults for the Print from USB menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Select Tray
Purpose:
To specify the input tray.
Values:
NOTE:
• Tray 2 is available only when the optional 250 sheet feeder is installed.
• 2-Sided
Purpose:
To print on both sides of a sheet of paper.
Values:
• Layout
Purpose:
To specify the output layout.
Values:
• PDF Password
Purpose:
To enter the password when you print the secure PDF job.
Values:
Bypass Tray The paper is fed from the bypass tray.
Tray 1
*
The paper is fed from the standard 250 sheet tray.
Tray 2 The paper is fed from the optional 250 sheet feeder.
1-Sided
*
Prints on one side of a sheet of paper.
2-Sided Prints on both sides of a sheet of paper to be bound by long edge.
2-Sided Binding Short Prints on both sides of a sheet of paper to be bound by short edge.
1Up
*
Prints one page on one side of a sheet of paper.
2Up Prints two pages on one side of a sheet of paper.
4Up Prints four pages on one side of a sheet of paper.
Enter PDF Password Enter the password to print the secure PDF job.
To Next Page
Loading...
