Using the Operator Panel Menus and Keypad 297
• Document Size
Purpose:
To specify the default document size.
Values:
mm series
*1
The default for Document Size varies depending on region-specific factory default.
inch series
*1
The default for Document Size varies depending on region-specific factory default.
• 2-Sided
Purpose:
To scan both sides of a sheet of paper.
Values:
• Lighten/Darken
Purpose:
To set the default scan density level.
Values:
A4 (210 x 297 mm)*
1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)*
1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x 10.5")
1-Sided* Scans one side of a document.
2-Sided Scans both sides of a document.
2-Sided Binding Short Scans both sides of a document to be bound by short edge.
Darker3 Makes the scanned image darker than the original. Works well with
light print or faint pencil markings.
Darker2
Darker1
Normal* Works well with standard typed or printed documents.
Lighter1 Makes the scanned image lighter than the original. Works well with
dark print.
Lighter2
Lighter3
To Next Page
Loading...
