292 Using the Operator Panel Menus and Keypad
• Select Tray
Purpose:
To specify the input tray.
Values:
NOTE:
• Tray 2 is available only when the optional 250 sheet feeder is installed.
• Lighten/Darken
Purpose:
To set the default copy density level.
Values:
• 2-Sided
Purpose:
To print on both sides of a sheet of paper.
Values:
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the copy.
Values:
Bypass Tray The paper is fed from the bypass tray.
Tray 1* The paper is fed from the standard 250 sheet tray.
Tray 2 The paper is fed from the optional 250 sheet feeder.
Darker3 Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Darker2
Darker1
Normal* Works well with standard typed or printed documents.
Lighter1 Makes the copy lighter than the original. Works well with dark print.
Lighter2
Lighter3
1→1-Sided* Prints on one side of a sheet of paper.
1→2-Sided Prints one sided originals on both sides of a sheet of paper.
2→1-Sided Prints two sided originals on one side of a sheet of paper.
2→2-Sided Prints two sided originals on both sides of a sheet of paper.
1→2 ShortEdge Prints on both sides of a sheet of paper to be bound by short edge.
2→1 ShortEdge Prints on both sides of a sheet of paper to be bound by short edge.
2→2 ShortEdge Prints on both sides of a sheet of paper to be bound by short edge.
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the
copy.
To Next Page
Loading...
