Safety Notes 21
CAUTION
Always follow all warning instructions marked on or supplied with this product.
To avoid the risk of burn injuries and electric shock, never touch the area with the "High
Temperature" or "High Voltage" marks on.
Keep electrical and mechanical safety interlocks active. Keep the safety interlocks away from
magnetic materials. Magnetic materials may accidentally activate the product and cause injuries or
electric shock.
Do not attempt to remove a paper deeply jammed inside the product, particularly a paper wrapped
around the fusing unit or the heat roller. Otherwise, it may cause injuries or burns. Switch off the
product immediately and contact your local Fuji Xerox representative.
Do not apply excessive force to hold thick document on the document glass. It may break the glass
and cause injuries.
Ventilate well during extended operation or mass copying. It may affect the office air environment
due to odor such as ozone in a poorly ventilated room. Provide proper ventilation to ensure the
comfortable and safe environment.
To Next Page
Loading...
Need help?
General
