Fuji Xerox DocuPrint M355 df - Page 266

266 Using the Operator Panel Menus and Keypad
• Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Values:
*1
HTTP-SSL/TLS is available only when a certificate is created using CentreWare Internet Services. For details about creating a
certificate, see the Help on the CentreWare Internet Services.
LPD Disable Disables the Line Printer Daemon (LPD) port.
Enable
*
Enables the LPD port.
Port9100 Disable Disables the Port9100 port.
Enable
*
Enables the Port9100 port.
FTP Disable Disables the FTP port.
Enable
*
Enables the FTP port.
IPP Disable Disables IPP port.
Enable
*
Enables IPP port.
SMB TCP/IP Disable Disables SMB TCP/IP port.
Enable
*
Enables SMB TCP/IP port.
SMB NetBEUI Disable Disables SMB Net BEUI port.
Enable
*
Enables SMB Net BEUI port.
WSD Print Disable Disables WSD Print.
Enable
*
Enables WSD Print.
WSD Scan Disable Disables WSD Scan.
Enable
*
Enables WSD Scan.
Network TWAIN Disable Disables Network TWAIN.
Enable
*
Enables Network TWAIN.
SNMP UDP Disable Disables the Simple Network Management Protocol (SNMP) UDP port.
Enable
*
Enables the SNMP UDP port.
StatusMessenger Disable Disables the Status Messenger feature.
Enable
*
Enables the Status Messenger feature.
InternetServices Disable Disables an access to CentreWare Internet Services embedded in the
printer.
Enable
*
Enables an access to CentreWare Internet Services embedded in the
printer.
Bonjour(mDNS) Disable Disables Bonjour
®
(mDNS).
Enable
*
Enables Bonjour (mDNS).
Telnet Disable
*
Disables Telnet.
Enable Enables Telnet.
Update Addr Book Disable Disables Update Address Book.
Enable
*
Enables Update Address Book.
HTTP-SSL/TLS
*1
Disable Disables HTTP-SSL/TLS.
Enable Enables HTTP-SSL/TLS.