304 Using the Operator Panel Menus and Keypad
NOTE:
• When MPT mode is set to Driver Specified, Paper Size, Paper Type, and Display Screen are not available.
• For more information on supported paper sizes, see also "Usable Print Media" on page 125.
Tray 1
Purpose:
To specify the paper loaded in the standard 250 sheet tray.
Values:
MPT mode Panel Specified Configures the paper size and type on the operator panel.
Driver Specified
*
Configures the paper size and type on the print driver.
Display Screen Off Does not display a popup menu that prompts to set Paper
Type and Paper Size when paper is loaded in the bypass tray.
On
*
Displays a popup menu that prompts to set Paper Type and
Paper Size when paper is loaded in the bypass tray.
Paper Size
mm series
A4 (210 x 297 mm)
*1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
New Custom Size Portrait(Y) 297 mm* Specifies the
length of the
custom size paper.
210-355 mm
Landscape(X) 210 mm* Specifies the width
of the custom size
paper.
140-215 mm
inch series Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)*
1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x 10.5")
New Custom Size Portrait(Y) 11.7 inches* Specifies the
length of the
custom size paper.
8.3-14.0 inches
Landscape(X) 8.3 inches* Specifies the width
of the custom size
paper.
5.5-8.5 inches
Paper Type Plain
*
Plain Thick
Lightweight Cardstock
Heavyweight Cardstock
Labels
Letterhead
Hole Punched
Colored
Other Type
To Next Page
Loading...
Need help?
General
